Products

Webinar: Optimize 3D Printing for Quality

May 15, 2020 • < 1 MIN READ
First Time Right Printing
Print parts right the first time with build optimization software.
By Ashley Eckhoff

One problem many companies have with 3D printing or Additive Manufacturing, especially at the beginning, is that the parts they print don’t have the required quality. Most companies may print a part as many as 5 or 10 versions of a part before they get a print they deem to be acceptable. This doesn’t have to be the case. New software tools are helping companies drastically improve their first article quality.

Please join Siemens for a live webinar optimizing your prints for first time quality on May 26, 2020. This webinar is being offered in two sessions to accommodate a world-wide audience.

Chad Barden from Siemens will discuss the problems that customers have with generating quality prints, some of the reasons for these issues, and how software can help mitigate these problems.

We welcome you to join the webinar and the discussion about first article printing with quality. You can register for this exciting and informative webinar here:

https://www.plm.automation.siemens.com/global/en/webinar/3d-print-build-optimization/77578

Ashley Eckhoff
Technical Content Writer

I've been with Siemens for over two decades, during which time I've met with many customers who also became friends, nurtured products through their lifecycle, learned and forgot more than I care to admit, reinvented myself several times over, and had a ton of fun in the process.

More from this author

What to read next:

Leave a Reply

This article first appeared on the Siemens Digital Industries Software blog at https://blogs.stage.sw.siemens.com/additive/webinar-optimize-3d-printing-for-quality/