Products

What’s New in PADS VX.2.5: Allowing Trace Loops

Most designs do not require loops. However, some design applications such as shielding signals and ground nets or power nets with partial vias may require them. In the latest PADS Professional VX.2.5 update, users can allow and disallow loops on nets in layout.

When disallowed, all selected nets will prevent loops during interactive routing. Typically, this should be applied for all nets in the design unless there is a need for a loop on specific nets. When allowed, users can interactively route a loop on their selected nets. Once the loop exists, it persists on the net. Users can continue to add loops regardless of the Prevent Loops settings.

Want to learn more about this feature and others in PADS Professional VX.2.5? Go to the What’s New page or download the latest update on Support Center.

Thanks for reading,

Shivani

Shivani Joshi

Leave a Reply

This article first appeared on the Siemens Digital Industries Software blog at https://blogs.stage.sw.siemens.com/electronic-systems-design/2019/04/04/whats-new-in-pads-vx-2-5-allowing-trace-loops/