Electronic Systems Design

Filter by:

This blog is a place to learn about electronic systems design, from PCB design to simulation and verification, to manufacturability and manufacturing execution.

Learn more about electronic systems design.

Featured posts

An image of Xpedition software showing managed blocks with text onscreen that says Design reuse in electronics

Design reuse in electronics

July 9, 2024

Last year, I sat with Steph Chavez, the host of the Printed Circuit Podcast, and engaged in a conversation about…

By Carlos Gazca
2 MIN READ
An illustration of a computer showing library books and ocb designs and text onscreen that says The foundations and challenges of electronics design data management

The foundations and challenges of electronics design data management

June 25, 2024

Last year on the Printed Circuit Podcast I talked with Andre Mosley, a seasoned professional in the field of electronics…

By Stephen V. Chavez
2 MIN READ
A picture of a library with text onscreen that says "fundamentals of library and design data management."

Fundamentals of library and design data management

June 13, 2024

When it comes to electronic systems design, I’m often asked what a robust library and design data management system should…

By Andre Mosley
4 MIN READ

Latest posts

Behind the TLA Winners: Aselsan

Behind the TLA Winners: Aselsan

December 12, 2017

This is the third in a series of blog posts showcasing the winning designs from the 27th Annual PCB Technology…

By Craig Armenti
2 MIN READ
So You’ve Found DDR Design Problems. Now What?

So You’ve Found DDR Design Problems. Now What?

December 12, 2017

After identifying design issues and their root cause(s), the next step is to fix them on the board and execute…

By Nitin Bagwath
2 MIN READ
Several Phenomena can Cause DDR Signals to Behave Badly

Several Phenomena can Cause DDR Signals to Behave Badly

November 30, 2017

Often, either the setup or hold time margin may be very low. If setup is low while hold time is…

By Nitin Bagwath
2 MIN READ
Behind the TLA Winners: Adcom

Behind the TLA Winners: Adcom

November 30, 2017

This is the second in a series of blog posts showcasing the winning designs from the 27th Annual PCB Technology…

By Craig Armenti
2 MIN READ
So Many Simulation Options!

So Many Simulation Options!

November 27, 2017

There are many reasons why you might want to run simulations on a circuit. For example, doing so can verify…

By Casey Silbernagel
2 MIN READ
PCB Technology Leadership Award Winner: Murrelektronic

PCB Technology Leadership Award Winner: Murrelektronic

November 20, 2017

Congratulations to Murrelektronik in Germany and the design team of Matthias Haak and Simon De Serra for their winning design…

By Jim Martens
< 1 MIN READ
PCB Carolina 2017 – Another record breaking year!

PCB Carolina 2017 – Another record breaking year!

November 16, 2017

This year’s PCB Carolina electronics show was once again held at the McKimmon Center on November 8th at NC State…

By John McMillan
2 MIN READ
Behind the TLA Winners: Fujitsu

Behind the TLA Winners: Fujitsu

November 15, 2017

This is the first in a series of blog posts showcasing the winning designs from the 27th Annual PCB Technology…

By Craig Armenti
2 MIN READ
Create and Simulate PCB’s in One Environment

Create and Simulate PCB’s in One Environment

November 12, 2017

Have you ever been in a situation where you created a design or document, maybe even a presentation, and your…

By Casey Silbernagel
2 MIN READ