Corporate

A Visual Approach Makes NC Programming Go Faster

The ability to visualize exactly the material that remains to be cut makes it much easier to create the most efficient machining operations and to determine their optimum sequence.

With NX 8.5 CAM you can improve NC programming time by as much as 10X for parts with prismatic features by using Volume-based 2.5D Milling. This new operation instantly displays the volumes machined by each operation and automatically updates the remaining workpiece material when you reorder them. Watch this short demonstration for an introduction to the concept.
http://www.youtube.com/watch?v=FLBxaczgq1U&hd=1
NX CAM – Introduction to Volume-based 2.5D Milling



Volume-based Milling can also reduce machining time because the operations automatically adjust the toolpaths to the size of the stock to eliminate wasted air-cutting. Watch this Tech Tip to see a more in-depth demonstration about how to apply this new approach.
http://www.youtube.com/watch?v=XOqXDObVlwI&hd=1
Tech Tip – How to use Volume-based 2.5D Milling to program prismatic parts

Can this technology save you time?

If you’re interested in seeing more NX CAM in action, visit our NX CAM Tech Tips YouTube playlist. REGISTER to join our live Tech Tip webinars.

Aaron Frankel
PLM Marketing

Aaron Frankel is with the marketing team at Siemens PLM Software and focuses on part manufacturing solutions. He has been in the PLM industry for over 15 years and enjoys helping companies apply innovative technology solutions to design and manufacturing challenges.

More from this author

Leave a Reply

This article first appeared on the Siemens Digital Industries Software blog at https://blogs.stage.sw.siemens.com/news/a-visual-approach-makes-nc-programming-go-faster/