Corporate Blog - Page 133 of 154

Featured posts

Siemens receives the 2023 Tech Cares Award from TrustRadius

August 23, 2023

For the second consecutive year, Siemens has been recognized with the Tech Cares Award from TrustRadius, a software peer review…

By Brooke Heerdegen

3 MIN READ

7 Solid Edge Experts | 18 hours | Ask them anything!

March 15, 2022

The Solid Edge Community is launching the first Ask the Expert (ATE) Days. 18 consecutive hours with 7 Solid Edge experts answering your every question on March 17, 2022

By Rachel Hartley

3 MIN READ

Could you be a Siemens Community Catalyst?

December 1, 2021

We’re initiating the Siemens Community Catalysts (SCC) program to recognize and reward a select group of Siemens community members, who…

By Rachel Hartley

4 MIN READ

Latest posts

Ride The Rails at 350 kph With Innovative Rail Design

March 9, 2009

The first time I rode the TGV from Geneva, Switzerland, to Paris, France, I was amazed at the speed (~300 kph). But today’s high-speed trains go even faster. One of our NX customers…

By Dora Smith

2 MIN READ

Pharma-Bio Simulation

March 3, 2009

I’m no CAE analyst – although I could play one on TV – but with a father in refrigeration, I’ve always been interested in the intricacies of heat flow and transfer. Many of today’s im…

By Dora Smith

2 MIN READ

NX Synchronous CAE; Part 2

February 26, 2009

In Part 1 of my NX Synchronous CAE post, I touched on how an analyst can make simple changes to non-NX design geometry to prepare the model for analysis. In this post I want to share how you ca…

By JerrySarfati

< 1 MIN READ

Synchronous Technology in History-Based Models

February 24, 2009

While there has been quite a bit of discussion recently about our synchronous technology in the history-free modeling mode, I’d like to share how it can also be used in the history-based modeli…

By JerrySarfati

< 1 MIN READ

Traditional Versus Synchronous

February 15, 2009

There continues to be a lot of discussion on merits of history free (Synchronous technology for Siemens PLM products) versus traditional history based modeling. There are many points at which you can…

By MarkBurhop

2 MIN READ

NX Synchronous CAE

February 12, 2009

Synchronous Technology has been talked about intensively in the design community. But did you know that it also impacts other areas – such as CAE? NX’s Design Freedom powered by Synchronous …

By JerrySarfati

< 1 MIN READ

Stimulation

February 11, 2009

You would have to be living under a rock to not know what the US Congress is working on this week on Capitol Hill. The Economic Stimulus Bill (warning: PDF link) has almost entirely consumed the nat…

By Christian Kelley

3 MIN READ

Siemens-UGS Merger: One Year Later

February 11, 2009

Managing Automation magazine recently wrote an in-depth article analyzing the progress of the former UGS organization since its acquisition by Siemens and subsequent renaming to Siemens PLM Software….

By Christian Kelley

< 1 MIN READ

Heard about Digital Manufacturing?

February 5, 2009

You might say, I know how to design a product, but digital manufacturing? Is it something like the creation of a product out of pure energy; a kind of STAR TREK technology? That would be really cool,…

By Markus Erlmann

< 1 MIN READ