Corporate Blog - Page 89 of 154

Featured posts

Siemens receives the 2023 Tech Cares Award from TrustRadius

August 23, 2023

For the second consecutive year, Siemens has been recognized with the Tech Cares Award from TrustRadius, a software peer review…

By Brooke Heerdegen

3 MIN READ

7 Solid Edge Experts | 18 hours | Ask them anything!

March 15, 2022

The Solid Edge Community is launching the first Ask the Expert (ATE) Days. 18 consecutive hours with 7 Solid Edge experts answering your every question on March 17, 2022

By Rachel Hartley

3 MIN READ

Could you be a Siemens Community Catalyst?

December 1, 2021

We’re initiating the Siemens Community Catalysts (SCC) program to recognize and reward a select group of Siemens community members, who…

By Rachel Hartley

4 MIN READ

Latest posts

Solid Edge Tips & Tricks: CAM Express & Synchronous Technology

January 4, 2011

Happy New Year! To start off 2011, we continue our Tips & Tricks series with more about CAM Express. In this week’s tip you will see how Synchronous Technology in CAM Express can be used to c…

By SusanCinadr

2 MIN READ

New Clothes for Jack and Jill

December 23, 2010

Do you remember the Jack and Jill Xmas video from last year? Well, they got some presents and are dressed in new clothes this year. Aren’t they looking great? BTW: this is a picture about how Jack…

By Markus Erlmann

< 1 MIN READ

Happy Holidays (the FEA Way)

December 22, 2010

Before heading off for some vacation, I wanted to wish everyone a happy holiday. I hope it is low stress and any displacements you make (like to visit the relatives) have all the elements neede…

By MarkBurhop

< 1 MIN READ

NX Customer Showcase: SpaceX

December 20, 2010

This week, I’d like to present another NX Customer Success Story. Space Exploration Technologies (SpaceX) is a privately-held launch vehicle developer and launch services provider with an ambitiou…

By JerrySarfati

< 1 MIN READ

Daimler and Siemens PLM Discuss Next Steps at Townhall

December 16, 2010

By now, I hope you have seen the Siemens PLM’s news on Daimler AG’s selection of NX for CAD. The press release noted Daimler would integrate work from more than 20 development centers and thei…

By JerrySarfati

2 MIN READ

Solid Edge Tips & Tricks: CAM Express Connection

December 15, 2010

In this week’s tip we show connectivity between Solid Edge and CAM Express from the Velocity Series. In this example synchronous technology is used to make rapid changes to model the model after the …

By SusanCinadr

2 MIN READ

NX Customer Showcase: Universal Stampi S.r.l.

December 14, 2010

I am going to try something new for NX. Over the next few weeks, I will try to showcase some customer case studies. This week, I am presenting Universal Stampi. They are based in Bagnolo Me…

By JerrySarfati

< 1 MIN READ

Injection Molding? Checkout Simpoe

December 13, 2010

Susan Cinadr, our tireless Solid Edge marketer and fellow blogger was in China a few weeks ago and got to talking with some folks from the Simpoe company. Simpoe does plastic inject…

By MarkBurhop

2 MIN READ

New Terms and New Ideas in CAD – Synchronous Technology

December 9, 2010

With all the changes in CAD that have been happening the last few years, there has been a struggle to come up with terms that properly describe and allow you to compare what comes from each CAD provi…

By MarkBurhop

2 MIN READ