Shannon McGinty
What’s New in NX | June 2023 | Sustainability Impact Analysis tool

What’s New in NX | June 2023 | Sustainability Impact Analysis tool

November 10, 2023
We’re back with another entry in our derivative content series! We strive to bring you new capabilities with our continuous...
By Shannon McGinty
< 1 MIN READ
Convert Imported PMI | NX Tips and Tricks

Convert Imported PMI | NX Tips and Tricks

October 4, 2023
Another entry of the Tips and Tricks series is here. This time we will be looking into how we can...
By Shannon McGinty
< 1 MIN READ
Topology Optimization Shape Constraints | NX Tips and Tricks

Topology Optimization Shape Constraints | NX Tips and Tricks

September 1, 2023
Welcome to another instalment of our Tips and Trick series! As you hopefully know by now, we bring you these...
By Shannon McGinty
< 1 MIN READ
Quality Dashboard | NX Tips and Tricks

Quality Dashboard | NX Tips and Tricks

August 7, 2023
Our NX continuous release strategy is designed to bring you updates that increase your design productivity. With our latest June...
By Shannon McGinty
< 1 MIN READ
Out of the box validation checks | NX Tips and Tricks

Out of the box validation checks | NX Tips and Tricks

July 21, 2023
Another installment of our Tips and Tricks series is here! This time we will be looking at how you can...
By Shannon McGinty
< 1 MIN READ
NX Join | Part Two | NX Tips and Tricks

NX Join | Part Two | NX Tips and Tricks

June 19, 2023
We’re happy to have you back, as we look at part two on NX Join! As you saw in part...
By Shannon McGinty
< 1 MIN READ
NX Join | Part One | NX Tips and Tricks

NX Join | Part One | NX Tips and Tricks

June 5, 2023
Introduction Another entry of our Tips and Tricks series is here, this time delving into NX™ Join. As with all...
By Shannon McGinty
< 1 MIN READ
Siemens Xcelerator | Advanced Machine Engineering | Part Three

Siemens Xcelerator | Advanced Machine Engineering | Part Three

May 4, 2023
Our third installment of our Advanced Machine Engineering series is here, and we’ll be discussing the detail engineering stage in...
By Shannon McGinty
< 1 MIN READ
Automated PMI | NX Tips and Tricks

Automated PMI | NX Tips and Tricks

April 17, 2023
You may know by now that our Tips and Tricks series strives to provide you with useful, bitesize bits of...
By Shannon McGinty
< 1 MIN READ
Siemens Xcelerator | Advanced Machine Engineering

Siemens Xcelerator | Advanced Machine Engineering

April 6, 2023
Part one of our new blog series is here! We’re discussing the Siemens Xcelerator Advanced Machine Engineering solution, and how...
By Shannon McGinty
< 1 MIN READ
What’s New in NX | Model Based Definition

What’s New in NX | Model Based Definition

April 4, 2023
NX™ software delivers advanced capabilities to support Model Based Definition (MBD) deployments by connecting engineering and production with significant innovation....
By Shannon McGinty
< 1 MIN READ
What's New in NX - Assemblies

What's New in NX - Assemblies

March 1, 2023
Introduction With NX™ software being a key part of the comprehensive digital twin, we understand and strive to bring you continuous...
By Shannon McGinty
< 1 MIN READ
Sketch | NX Tips and Tricks

Sketch | NX Tips and Tricks

January 27, 2023
Since the December 2022 release, we have looked through the newest capabilities that have been brought to you in NX™...
By Shannon McGinty
< 1 MIN READ
NX continues to drive success for leading companies

NX continues to drive success for leading companies

November 10, 2022
The growth of NX Siemens Digital Industries Software has been driving digital transformation for years, and now with the Xcelerator...
By Shannon McGinty
< 1 MIN READ
August 2022 NX CAD Early Access Program Registration is Now Open!

August 2022 NX CAD Early Access Program Registration is Now Open!

August 22, 2022
The August 2022 NX CAD Early Access Program registration is now open. NX CAD EAP is back, both in-person (in...
By Shannon McGinty
< 1 MIN READ
What is New in Siemens NX | Summer 2022

What is New in Siemens NX | Summer 2022

June 13, 2022
Siemens NX’s continuous release strategy is what we are providing, to bring you the latest and greatest every six months....
By Shannon McGinty
< 1 MIN READ
NX Render Talks Marine Industry | Part Five: NX VR for Design Review

NX Render Talks Marine Industry | Part Five: NX VR for Design Review

May 16, 2022
Since the pandemic, we can all relate to the importance of collaborating with your team remotely and effectively. With NX...
By Shannon McGinty
< 1 MIN READ
What’s New in NX: Collaborative Design

What’s New in NX: Collaborative Design

May 13, 2022
Let’s delve in again to another one of the latest capabilities in the NX release. If you prefer listening over...
By Shannon McGinty
< 1 MIN READ
NX Render Blog Series for the Marine Industry | Part Five: NX VR for Design Review

NX Render Blog Series for the Marine Industry | Part Five: NX VR for Design Review

April 14, 2022
Introduction We’re at the end of our NX Render talks series for the marine industry! And with that, we’re bringing...
By Shannon McGinty
< 1 MIN READ
NX Render Talks Marine Industry | Part Four: Exterior Environment Customization

NX Render Talks Marine Industry | Part Four: Exterior Environment Customization

March 24, 2022
Part four of our NX Render Talks series is here, and this time we’re together, in person for the interview!...
By Shannon McGinty
< 1 MIN READ
What's New in NX | Intelligence Driven Design: Topology Optimization

What's New in NX | Intelligence Driven Design: Topology Optimization

March 17, 2022
You’ve hopefully seen by now our latest release of NX, but if you haven’t, then check out our first YouTube...
By Shannon McGinty
< 1 MIN READ
NX Render Blog Series | The Visualization Process for The Marine Industry – Part Four

NX Render Blog Series | The Visualization Process for The Marine Industry – Part Four

February 17, 2022
Introduction It’s been a while since our last instalment of the NX Render series for the marine industry, but here...
By Shannon McGinty
< 1 MIN READ
NX Render Talks Marine Industry | Part Three: Lighting and Custom Environments

NX Render Talks Marine Industry | Part Three: Lighting and Custom Environments

February 10, 2022
We know it’s been a while since we shared our last NX Render Talks for marine (listen here), but we...
By Shannon McGinty
< 1 MIN READ
On-demand Webinar: Visualizing the Digital Twin for Marine

On-demand Webinar: Visualizing the Digital Twin for Marine

February 8, 2022
You can now register to watch the on-demand webinar on enhancing product visualization workflows from start to finish! “The future...
By Shannon McGinty
< 1 MIN READ
NX Render Blog Series | The Visualization Process for The Marine Industry - Part Three

NX Render Blog Series | The Visualization Process for The Marine Industry - Part Three

December 2, 2021
Introduction For anyone who isn’t an expert in rendering, creating an environment like one that the Princess Yacht X95 is...
By Shannon McGinty
< 1 MIN READ
Share your NX story at Realize LIVE 2022

Share your NX story at Realize LIVE 2022

November 9, 2021
REALIZE LIVE 2022 | LAS VEGAS | BERLIN We are extremely excited to announce our Realize LIVE event is back...
By Shannon McGinty
< 1 MIN READ
NX Render Talks Marine Industry | Part Two: Materials and Appearance Management

NX Render Talks Marine Industry | Part Two: Materials and Appearance Management

November 4, 2021
Part Two of our Render Talks for Marine is now live! The second talk is once again joined by Shannon McGinty,...
By Shannon McGinty
< 1 MIN READ
NX Render Blog Series | The Visualization Process for The Marine Industry - Part Two

NX Render Blog Series | The Visualization Process for The Marine Industry - Part Two

October 22, 2021
Introduction You have likely seen by now that the latest version of Siemens NX introduced Appearance Management. We hope from...
By Shannon McGinty
< 1 MIN READ
NX Render Talks Marine Industry | Part One: Model Setup and Realize Shape

NX Render Talks Marine Industry | Part One: Model Setup and Realize Shape

September 30, 2021
We are happy to be bringing you another series of NX Render Talks, this time looking at the marine sector....
By Shannon McGinty
< 1 MIN READ
NX Render Blog Series | The Visualization Process for The Marine Industry - Part One

NX Render Blog Series | The Visualization Process for The Marine Industry - Part One

September 9, 2021
Introduction Do you know how crucial an effective visualization workflow is for the continuation of success within companies? Well we...
By Shannon McGinty
< 1 MIN READ
How to Visualize the Digital Twin for Heavy Equipment Webinar

How to Visualize the Digital Twin for Heavy Equipment Webinar

June 25, 2021
Are you a designer or engineer in the heavy equipment sector who’s had to adapt to working remotely during the global...
By Shannon McGinty
< 1 MIN READ
NX Render Blog Series: The Visualization Process for Consumer Products - Part Four

NX Render Blog Series: The Visualization Process for Consumer Products - Part Four

June 10, 2021
Introduction Our NX Render Series for Consumer Products is back again with part four, the penultimate step! Cameras are a...
By Shannon McGinty
< 1 MIN READ
NX Render Blog Series: The Visualization Process for Consumer Products - Part Two

NX Render Blog Series: The Visualization Process for Consumer Products - Part Two

April 15, 2021
Introduction  Here we are with Part Two of our second series following the visualization process for consumer products. The same...
By Shannon McGinty
< 1 MIN READ
NX Render Blog Series: The Visualization Process for Heavy Equipment - Part Five

NX Render Blog Series: The Visualization Process for Heavy Equipment - Part Five

January 21, 2021
Introduction We’re back with the fifth and final stage of the visualization process in the NX Render blog series for...
By Shannon McGinty
< 1 MIN READ
NX Render Blog Series: The Visualization Process for Heavy Equipment – part three

NX Render Blog Series: The Visualization Process for Heavy Equipment – part three

November 3, 2020
Introduction We’re back with Part Three of the NX Render blog series, where we take you through the five stages of...
By Shannon McGinty
< 1 MIN READ
NX Render Blog Series: The Visualization Process for Heavy Equipment - part two

NX Render Blog Series: The Visualization Process for Heavy Equipment - part two

October 8, 2020
Introduction As you may know already from Part One of the NX Render blog series, we are going to be taking you on a deep...
By Shannon McGinty
< 1 MIN READ
Enhancing architectural simulation applications with high quality visuals

Enhancing architectural simulation applications with high quality visuals

May 1, 2020
A new article discusses how Siemens Digital Industries Software has enabled AEC (architecture, engineering and construction) company, TIAN Building Engineering,...
By Shannon McGinty
< 1 MIN READ