News - NX Design

NX Render Blog Series | The Visualization Process for The Marine Industry – Part Four

February 17, 2022

Introduction It’s been a while since our last instalment of the NX Render series for the marine industry, but here…

By Shannon McGinty

6 MIN READ

NX Render Blog Series | The Visualization Process for The Marine Industry – Part Three

December 2, 2021

Introduction For anyone who isn’t an expert in rendering, creating an environment like one that the Princess Yacht X95 is…

By Shannon McGinty

6 MIN READ

NX Render Blog Series | The Visualization Process for The Marine Industry – Part Two

October 22, 2021

Introduction You have likely seen by now that the latest version of Siemens NX introduced Appearance Management. We hope from…

By Shannon McGinty

5 MIN READ

NX Render Blog Series | The Visualization Process for The Marine Industry – Part One

September 9, 2021

Introduction Do you know how crucial an effective visualization workflow is for the continuation of success within companies? Well we…

By Shannon McGinty

5 MIN READ

Siemens enters agreement to purchase FORAN software to expand capabilities in marine design and engineering

July 20, 2021

Siemens has entered into an agreement to purchase FORAN software to expand capabilities in marine design and engineering. FORAN is CAD/CAE/CAM software for the design, construction and engineering of vessels and marine structures. This will enable Siemens to better support marine customers in digital transformation, with a focus on meeting Shipyard 4.0 and sustainability goals

By William Chanatry

2 MIN READ

NX Render Blog Series: The Visualization Process for Consumer Products – Part Four

June 10, 2021

Introduction Our NX Render Series for Consumer Products is back again with part four, the penultimate step! Cameras are a…

By Shannon McGinty

5 MIN READ

Innovation can’t wait at the University of Irvine Engineering Conference

May 14, 2021

When it comes to technology, one thing you can count on is that nothing is going to stay the same….

By _vanessa_

2 MIN READ

A Bosch Coffee Machine sitting on a kitchen top

NX Render Blog Series: The Visualization Process for Consumer Products – Part Three

May 13, 2021

Introduction Welcome back to part three of the NX Render blog series. We’re taking you on a journey through the visualization…

By Jamie Tyler

5 MIN READ

NX Render Blog Series: The Visualization Process for Consumer Products – Part Two

April 15, 2021

Introduction Here we are with Part Two of our second series following the visualization process for consumer products. The same…

By Shannon McGinty

5 MIN READ