Products

Set up your mill-turn machine with NX CAM

May 20, 2014 • < 1 MIN READ
By DerekHart

Mill_Turn_simulation_two_spindles.png


This Tech Tip shows how to use the example machines in your NX installation to setup a programming environment for mill-turns. Learn how to easily set up and simulate these versatile machines in both modes using the example mill-turn machines provided with thte NX software. See:



  • How to use the provided mill-turn machine examples

  • How to set up and simulate various turning, milling, and machine-specific operations.


See the Tech Tip here!

Derek Hart

I've been focused on PLM CAM software, in one way or another, since 1992, which sounds like a very long time. I've written posts, done implementation and training, served as a product manager, and as a marketer. It has all been fun and I've met a lot of interesting people and seen a lot of interesting machine shops.

More from this author

What to read next:

Leave a Reply

This article first appeared on the Siemens Digital Industries Software blog at https://blogs.stage.sw.siemens.com/nx-manufacturing/set-up-your-mill-turn-machine-with-nx-cam/