Products

Let NX CAM create your in-process material models automatically

May 22, 2014 • < 1 MIN READ
By DerekHart

automatic in process material.png


Manufacturing components in multiple setups often requires a programmer to provide an in-process workpiece to represent the partially cut condition to the next setup. This Tech Tip shows how to:



  • Let NX CAM calculate the partially cut workpiece model at the end of one NC setup

  • Reference a previous setup’s calculated in-process condition as the starting blank for a subsequent setup

  • Reference in-process conditions from with the same part file or even from an external part file


See the Tech Tip here!

Derek Hart

I've been focused on PLM CAM software, in one way or another, since 1992, which sounds like a very long time. I've written posts, done implementation and training, served as a product manager, and as a marketer. It has all been fun and I've met a lot of interesting people and seen a lot of interesting machine shops.

More from this author

What to read next:

Leave a Reply

This article first appeared on the Siemens Digital Industries Software blog at https://blogs.stage.sw.siemens.com/nx-manufacturing/let-nx-cam-create-your-in-process-material-models-automatically/