Products

New Tech Tip describes new-for-NX CAM 9 Cut Region Management

Last week’s Tech Tip was the first in our series of new NX CAM 9 enhancement webinars. This Tech Tip describes some powerful new options for optimizing cut patterns across steep and non-steep regions. Mold and Die programmers will be especially interested in these new capabilities.

For Area Mill operations, the new interactive Cut Region Management combines steep and non-steep cut patterns and give extensive user control over how to define, organize, and process the workpiece’s cut regions.

For Flow Cut operations, the system cuts steep valleys and corners with Z-level patterns and cuts non-steep valleys by tracing along the valleys.

Check out the replay:

http://community.plm.automation.siemens.com/t5/Tech-Tips-Knowledge-Base-NX/Learn-about-the-new-interactive-Cut-Region-Management-in-NX-CAM/ta-p/16373

Derek Hart

I've been focused on PLM CAM software, in one way or another, since 1992, which sounds like a very long time. I've written posts, done implementation and training, served as a product manager, and as a marketer. It has all been fun and I've met a lot of interesting people and seen a lot of interesting machine shops.

More from this author

Leave a Reply

This article first appeared on the Siemens Digital Industries Software blog at https://blogs.stage.sw.siemens.com/nx-manufacturing/new-tech-tip-describes-new-for-nx-cam-9-cut-region-management/