NX Manufacturing - Page 54 of 61

Featured posts

Join Siemens at IMTS 2024

July 23, 2024

Join Siemens at The International Manufacturing Technology Show (IMTS) 2024, from September 9-14 in Chicago. Visit Siemens booth to witness the complete production process for a crucial component of an electric vehicle (EV), from the initial specs to the final product.

By Kelly Gallagher

2 MIN READ

Image of Author Chris Pollack and Tony Gunn from MTDCNC taking a ride in the car that uses the parts detailed here.

EV Component Manufacturing – Part 6

June 24, 2024

Guest author Chris Pollack, the lead CNC technology trainer at Siemens Machine Tool Systems, shares insights on how digital manufacturing solutions are used to design, manufacture, and inspect a high-performance steering knuckle assembly for the eRod EV sports car.

By Matthias Leinberger

4 MIN READ

What’s new in NX for manufacturing (June 2024)

June 14, 2024

Summer is here, and we have a lot in store for you with the release of a new version of NX for manufacturing. With NX 2406, you will experience new capabilities and enhancements that can help you boost your part manufacturing productivity.

By Koushik Kasturi

11 MIN READ

Latest posts

Shop Docs Customization Tutorial and Q&A for NX CAM 9

November 4, 2013

Want to learn about the updates to Shop Docs in NX CAM 9?

If so, you may find these new Tech Tips helpful:

NX 9 Shop Docs Common Questions and Answers
…

By NXManufacturing

< 1 MIN READ

HAT GIVEAWAY – 30 days left to enter!

November 1, 2013

ENTEROURHAT GIVEAWAY

Visit our NX Manufacturing Forum for a chance to win.
We’re looking forward to reading your comments about NX CAM 9.
– Here’s how …

By Aaron Frankel

< 1 MIN READ

New Tech Tips describe NX CAM 9 updates in Turning and Holemaking

October 29, 2013

Two new Tech Tips have been posted to the Tech Tip knowledge base. Both of these are distilled from Tom Van’t Erve’s webinar session last week. Tom presented the updates for both Turning and Holemaki…

By DerekHart

< 1 MIN READ

Introducing Die/Mold Machining Self-Demos for NX CAM 9

October 29, 2013

Introducing seven new self-demos designed to quickly bring you up to speed on what’s ne w for Die/Mold Machining in NX CAM 9. These enhancements improve efficiency, control, and quality of finish whe…

By NXManufacturing

3 MIN READ

Tilt Tool Axis

October 29, 2013

I showed in a previous blog post how to use Divide By Holder to keep the cutting tool as short as possible. Today I want to show how to take advantage of multi-axis capability of NX CAM and CAM…

By wrightj

2 MIN READ

Introducing What’s New Self-Demos for NX CAM 9

October 22, 2013

Self-demos are available as self-study learning aids designed to quickly bring you up to speed on what’s new in NX CAM 9. (Read more about the many new capabilities in NX CAM 9.)

These s…

By NXManufacturing

5 MIN READ

NX CAM 9: Providing industrial-strength CAM for complex part machining

October 16, 2013

NX TM CAM 9 software (available now) delivers industrial-strength CAM for a wide range of industries. If you’re a manufacturer looking for the next level of control and faster computer numerical con…

By NXManufacturing

4 MIN READ

New Tech Tip describes new-for-NX CAM 9 Cut Region Management

October 15, 2013

Last week’s Tech Tip was the first in our series of new NX CAM 9 enhancement webinars. This Tech Tip describes some powerful new options for optimizing cut patterns across steep and non-steep regions…

By DerekHart

< 1 MIN READ

NX CAM 9: Providing powerful CAM for prismatic parts machining

October 14, 2013

NX TM CAM 9 software (available now) delivers many new capabilities and enhancements that can improve computer numerical control (CNC) programming and machining productivity for wide range of indus…

By NXManufacturing

5 MIN READ