NX Manufacturing - Page 57 of 61

Featured posts

Join Siemens at IMTS 2024

July 23, 2024

Join Siemens at The International Manufacturing Technology Show (IMTS) 2024, from September 9-14 in Chicago. Visit Siemens booth to witness the complete production process for a crucial component of an electric vehicle (EV), from the initial specs to the final product.

By Kelly Gallagher

2 MIN READ

Image of Author Chris Pollack and Tony Gunn from MTDCNC taking a ride in the car that uses the parts detailed here.

EV Component Manufacturing – Part 6

June 24, 2024

Guest author Chris Pollack, the lead CNC technology trainer at Siemens Machine Tool Systems, shares insights on how digital manufacturing solutions are used to design, manufacture, and inspect a high-performance steering knuckle assembly for the eRod EV sports car.

By Matthias Leinberger

4 MIN READ

What’s new in NX for manufacturing (June 2024)

June 14, 2024

Summer is here, and we have a lot in store for you with the release of a new version of NX for manufacturing. With NX 2406, you will experience new capabilities and enhancements that can help you boost your part manufacturing productivity.

By Koushik Kasturi

11 MIN READ

Latest posts

Inside NX CAM’s Machine Tool Simulation

August 12, 2013

See how you can verify your machining operations in NX CAM using integrated machine tool simualtion. The G-code driven simulation displays full material removal in your machining environment includin…

By Danny Santoro

< 1 MIN READ

Theme of the Month: Machine Tool Simulation

August 8, 2013

NC programmers rely on accurate machine simulation to show all of the machine motion that can impact the safety of their programs. NX CAM provides G-code driven simulation, using the actual …

By NXManufacturing

2 MIN READ

Tech Tip: 5-Axis Chamfer Milling Technique

July 31, 2013

Please click the link to read the Tech Tip, 5-Axis Chamfer Miling Technique.

By NXManufacturing

< 1 MIN READ

Learn how to machine turbomachinery components with NX CAM

July 29, 2013

Please click the link to watch the Tech Tip, Learn how to machine turbomachinery components with NX CAM.

By NXManufacturing

< 1 MIN READ

Mazak 5-axis Machine Programmed with NX CAM

July 29, 2013

VMH International, a Siemens PLM Software partner, shows a Mazak 5-axis machine programmed with NX CAM at IMTS 2012.

By Danny Santoro

< 1 MIN READ

Demonstration of NX Turbomachinery Milling

July 26, 2013

NX Turbomachinery Milling simplifies the NC programming of complex 5-axis blisks and impellers for aero-engines, turbo-machinery and power generation equipment.

You can…

By Danny Santoro

< 1 MIN READ

Manufacturing software and equipment enable leading-edge process for personalizing medical devices

July 24, 2013

Siemens’ image-to-implant (i2i) solution enables a highly automated engineer-to-order process for medical device companies who develop personalized products and therapies. Beginning with an MRI or CT…

By Danny Santoro

< 1 MIN READ

Aerospace manufacturer gets best of both worlds: CNC programming and machining

July 22, 2013

“By combining the best toolpaths from VoluMill with the comprehensive programming environment of NX CAM, Steelville Manufacturing is enjoying significant productivity gains and truly getti…

By NXManufacturing

4 MIN READ

NX helps turbine blade manufacturer reduce production steps by 60 percent

July 9, 2013

“Before NX, we would spend on average three days generating NC paths after an adaptation of the design. Thanks to the integration of NX, this is now done in half and hour.” Gerrit Mulder, Engineering…

By NXManufacturing

5 MIN READ