Computer Aided Manufacturing (CAM)

Manufacturing software and equipment enable leading-edge process for personalizing medical devices

July 24, 2013

Siemens’ image-to-implant (i2i) solution enables a highly automated engineer-to-order process for medical device companies who develop personalized products and therapies. Beginning with an MRI or CT…

By Danny Santoro

< 1 MIN READ

Aerospace manufacturer gets best of both worlds: CNC programming and machining

July 22, 2013

“By combining the best toolpaths from VoluMill with the comprehensive programming environment of NX CAM, Steelville Manufacturing is enjoying significant productivity gains and truly getti…

By NXManufacturing

4 MIN READ

NX helps turbine blade manufacturer reduce production steps by 60 percent

July 9, 2013

“Before NX, we would spend on average three days generating NC paths after an adaptation of the design. Thanks to the integration of NX, this is now done in half and hour.” Gerrit Mulder, Engineering…

By NXManufacturing

5 MIN READ

Executive Insight: Boosting manufacturers big and small with PLM

July 8, 2013

By Zvi Feuer
Senior VP of Manufacturing Software for Siemens PLM Software

I’m doing a lot a traveling these days to places like Moscow, Dallas, Detroit, and Nuremburg. While much of the …

By NXManufacturing

3 MIN READ

Driving CNCs with NX CAM at Joe Gibbs Racing

June 25, 2013

NX CAM has handled every multi-axis part Joe Gibbs has attempted. Every cylinder head is ported using this technology. The main reason why Joe Gibbs uses NX CAD/CAM is for the seamless integration be…

By Danny Santoro

< 1 MIN READ

Is It Harder to Manage Manufacturing Data than Design Data?

June 24, 2013

This blog post has been licensed for hosting by Siemens PLM. The concepts, ideas and positions of this post have been developed independently by Industry Analyst Chad Jackson of Lifecycle Insights. ©…

By Chad Jackson

4 MIN READ

PLM Connection 2013 Is Here

June 2, 2013

This week we’re in Dallas to learn more about PLM. The conference covers a wide range of the PLM spectrum, but we’re focusing on PLM for part manufacturing. This includes topics such as…

By Aaron Frankel

2 MIN READ

The Misnomer of Feature-Based Machining

May 31, 2013

This blog post has been licensed for hosting by Siemens PLM. The concepts, ideas and positions of this post have been developed independently by Industry Analyst Chad Jackson of Lifecycle Insights. ©…

By Chad Jackson

4 MIN READ

In Simulation We Trust

May 30, 2013

This article appeared in MoldMaking Technology magazine, Gardner Publications, Inc., USA. www.moldmakingtechnology.com

Some CAD systems come equipped with directly integrated mold flo…

By Aaron Frankel

7 MIN READ