Siemens Digital Industries Software Blog Network

Siemens Digital Industries Software Blogs


Embedded Software

At ECS Syd - talking about memory fragmentation, power management and self-test

March 02, 2015
Each Fall, just before the weather becomes too horrible, I get to attend ECS [Embedded Conference Scandinavia] in Stockholm, Sweden....
By Colin Walls
3 MIN READ

Academic and Startups

Academic Solid Edge STEM projects/tutorials

March 02, 2015
We’ve just posted two new Solid Edge STEM projects/tutorials on our academic webpages.The Front Loader and the Greenpower Steering Wheel. Front Loader ...
By Bijy Vattathara
< 1 MIN READ

Design with Calibre

2-5X Productivity Improvement in 14FDSOI Layout Design: STMicroelectronics Experience with Calibre RealTime

March 02, 2015
By Atul Bhargava and Mehak Malhotra, STMicroelectronics, India and Srinivas Velivala, Mentor Graphics Rather than just fixing DRC errors as...
By Design With Calibre
6 MIN READ

Simulating the Real World

Mentor Graphics at Semi-Therm 31 - 'Dolly the Heatsink' and much more

March 02, 2015
Semi-Therm, the world’s largest dedicated electronics thermal conference, will take place between March 15-19 at the Doubletree Hotel in San...
By Robin Bornoff
2 MIN READ

Simcenter

Continuing the Femap Symposium Series 2015 in Washington DC

February 27, 2015
The Femap Symposium Series 2015 continued last week with an event at the Smithsonian National Air and Space Museum in Dulles, VA co-hosted with Siemens channel partner, Structural Design and Analysis...
By AlRobertson
3 MIN READ

Tecnomatix

How to Use Tecnomatix Issue Management and CAPA for Issue Resolution

February 26, 2015
  Tecnomatix Issue Management and CAPA solutions, based on Teamcenter, can be used to easily capture various forms of manufacturing production complaints, defects and non-conformance...
By Mike Rouman
< 1 MIN READ

Embedded Software

What is the first day of the week?

February 26, 2015
On a previous occasion, I suggested that it was time for change. I feel strongly that our calendar – 7...
By Colin Walls
2 MIN READ

Verification Horizons

Is Gate-Level Simulation Still Required Nowadays??

February 26, 2015
A colleague recently asked me: Has anything changed? Do design teams tape-out nowadays without GLS (Gate-Level Simulation)? And if so,...
By Gordon Allan
4 MIN READ

Academic and Startups

Brigham Young University featured NX software of PACE course competitions

February 26, 2015
Each year, PACE (Partners for the Advancement of Collaborative Education) faculty initiate course competitions in more than 20 computer aided design, engineering graphics, computer aided enginee...
By Bijy Vattathara
3 MIN READ

Latest podcast episodes


Talking Aerospace Today Podcast

Insights on AAM Autonomy from Automotive Part Two – Inside AAM

July 19, 2024
Autonomous advanced air mobility (AAM) vehicles are a goal for multiple companies working in the sector. Some are planning to...
By Quinn Foster
< 1 MIN READ

On the Move: A Siemens Automotive Podcast

Ep 1 - Introducing On the Move: A Siemens Automotive Podcast with Nand Kochhar

July 19, 2024
The automotive and transportation industries are in the middle of a transformation in how vehicles are designed, made, and sold....
By Conor Peick
< 1 MIN READ

AI Spectrum

Enabling low-code development with AI – Part 2

July 18, 2024
Going forward, AI will be an important part of many industrial processes, from data analytics to development to manufacturing, there...
By Spencer Acain
< 1 MIN READ