Siemens Digital Industries Software Blog Network

Siemens Digital Industries Software Blogs


NX Design

THE PROMISE OF PMI: Transforming Engineering Documentation

November 13, 2013
According to wikipedia, PMI is defined as: Product and manufacturing information, also abbreviated PMI, conveys non-geometric attributes in 3D computer-aided design (CAD) a...
By JerrySarfati
< 1 MIN READ

NX Manufacturing

New Tech Tip reveals what is new in NX CMM 9

November 13, 2013
A new Tech Tips has been posted to the Tech Tip knowledge base showcasing the new enhancements to NX CMM 9. Steve Scigliano takes us through all the new capabilities and demonstrates some ...
By DerekHart
< 1 MIN READ

Solid Edge

Sheet metal intro

November 13, 2013
This article will start a series on Solid Edge sheet metal. My goal is to go through the functions to give new users a taste for how it works, but also try to find tools that really go beyond where w...
By MLombard
6 MIN READ

Academic and Startups

Row Row Row A Solid Edge Designed Boat - New Student Project Available

November 12, 2013
AllyPLM has put together curriculum to build a rowboat in Solid Edge. You can access the materials on their website. See more on thepost they published in our Collaborate & Contribute Curr...
By Dora Smith
< 1 MIN READ

Embedded Software

Embedded hypervisors

November 11, 2013
Some technologies, it seems to me, should not really exist. They do, however, because they address a specific need. Typically,...
By Colin Walls
2 MIN READ

NX Design

Multi-touch Design with NX

November 11, 2013
As most smart phone or tablet users know, it is easy to utilize simple gestures on a touch screen. Multi-touch displays have the potential to make us more productive in design. Traditiona...
By JerrySarfati
< 1 MIN READ

Simcenter

What's New in NX 9 Simulation - Meshing Techniques

November 11, 2013
Last week at the NX CAE Symposium, our own Mark Lamping gave a presentation and demonstration on What's New in NX 9 Simulation - Meshing Techniques. This blog post features his presentation as well a...
By SusanCinadr
< 1 MIN READ

Solid Edge

Inspect Tools: Smart Measure

November 11, 2013
When I asked for suggestions for blog topics, one that came back was for an article on the Inspect Tools. It has taken a while, but I’m finally getting around to fulfilling that request. It ...
By MLombard
5 MIN READ

Academic and Startups

Interesting Academic Story on the NX Simulation Forum

November 08, 2013
The NX CAE Symposium was this week. I wasn't at the event butwatched outtakes on Twitter #NXCAE13 . Check out theinteresting work on planar titanium stentsby&n...
By Dora Smith
< 1 MIN READ

Latest podcast episodes


Talking Aerospace Today Podcast

Insights on AAM Autonomy from Automotive Part Two – Inside AAM

July 19, 2024
Autonomous advanced air mobility (AAM) vehicles are a goal for multiple companies working in the sector. Some are planning to...
By Quinn Foster
< 1 MIN READ

On the Move: A Siemens Automotive Podcast

Ep 1 - Introducing On the Move: A Siemens Automotive Podcast with Nand Kochhar

July 19, 2024
The automotive and transportation industries are in the middle of a transformation in how vehicles are designed, made, and sold....
By Conor Peick
< 1 MIN READ

AI Spectrum

Enabling low-code development with AI – Part 2

July 18, 2024
Going forward, AI will be an important part of many industrial processes, from data analytics to development to manufacturing, there...
By Spencer Acain
< 1 MIN READ