Siemens Digital Industries Software Blog Network

Siemens Digital Industries Software Blogs


Solid Edge

Get the Most from Synchronous by using a little History

July 03, 2013
Before I was hired by Siemens, I was asked to present at SEU13. I still consider myself a new user, and not an expert in any way, so I had to say something based on past experience, but demonstrated ...
By MLombard
7 MIN READ

Embedded Software

How long is a piece of string?

July 01, 2013
Answering questions is something that I am often expected to do. Maybe I am presenting at a conference, doing an...
By Colin Walls
2 MIN READ

Electronic Systems Design

Start Smarter with PADS Webinar

July 01, 2013
I’d like to thank all those that attended my “Start Smarter with PADS” webinar last Thursday.  You set records here...
By Jim Martens
< 1 MIN READ

Solid Edge

SEU Keynote Addresses

June 29, 2013
There were four keynote addresses at SEU13 that I want to summarize here: Chuck Grindstaff - CEO Siemens PLM Karsten Newbury - GM Mainstream Engineering Bernard Amadei - Engineers With...
By MLombard
5 MIN READ

Tecnomatix

The Benefits of PLM-based CAPA Software

June 28, 2013
If you’re a manufacturer in automotive, aerospace/defense, industrial equipment, electronics, medical devices or any other discrete industry, the evidence is becoming clear that you will benefit...
By Tim Egloff
< 1 MIN READ

Electronic Systems Design

Correlating simulation and measurement

June 28, 2013
We go through great pains to ensure that our analysis tools give highly accurate answers in the most efficient manner...
By Patrick Carrier
< 1 MIN READ

Tecnomatix

Recap of the 2013 Digital Manufacturing Symposium at Sao Paulo, Brazil

June 28, 2013
Marcio Tubini from Kuka Systems, Brazil shares their virtual commissioning implementation and how it allowed them to reduce setup time by 30% Marcos Barbosa from SPI...
By abhidastidar
< 1 MIN READ

Verification Horizons

Part 3: The 2012 Wilson Research Group Functional Verification Study

June 28, 2013
Clocking and Power Trends In Part 2 of this series of blogs, I continued the discussion focused on design trends...
By Harry Foster
4 MIN READ

Embedded Software

QR codes

June 27, 2013
You see them everywhere – these distinctive square graphics, that look a bit like bar-codes, but different. They are QR...
By Colin Walls
2 MIN READ

Latest podcast episodes


Talking Aerospace Today Podcast

Insights on AAM Autonomy from Automotive Part Two – Inside AAM

July 19, 2024
Autonomous advanced air mobility (AAM) vehicles are a goal for multiple companies working in the sector. Some are planning to...
By Quinn Foster
< 1 MIN READ

On the Move: A Siemens Automotive Podcast

Ep 1 - Introducing On the Move: A Siemens Automotive Podcast with Nand Kochhar

July 19, 2024
The automotive and transportation industries are in the middle of a transformation in how vehicles are designed, made, and sold....
By Conor Peick
< 1 MIN READ

AI Spectrum

Enabling low-code development with AI – Part 2

July 18, 2024
Going forward, AI will be an important part of many industrial processes, from data analytics to development to manufacturing, there...
By Spencer Acain
< 1 MIN READ