Product: Simcenter 3D

Filter by:

Simulation-Driven Design: Simulate While Designing

June 25, 2018

Welcome back to the fourth part of our simulation-driven design blog series! If you have not had a chance to read our previous posts, check them out below!
 
Part 1: The Age of Simulatio…

By mirna_b
2 MIN READ

2018 Simcenter Conference: Why you NEED to attend.

June 6, 2018

Engineering can often be a lonely pursuit. For all the talk of “teamwork” and “collaboration,” most simulation engineers spend a significant amount of their working week alone in a cubicle staring (o…

By Stephen Ferguson
3 MIN READ

Used & Abused: The Life of an Airplane Seat.

June 1, 2018

Air Travel. What kind of thoughts comes to mind when you think of it? Luxury? Glamour? More often than not, these days it conjures up more stoic terms: endurance, perseverance. Well if that’s how you…

By Ganesh Sethuraman
2 MIN READ

Simulation-Driven Design: Generate Completely New Design Concepts

May 28, 2018

Welcome back to the third part of our simulation-driven design blog series! If you haven’t read the previous posts, you can do so here:
 
Part 1: The Age of Simulation-Driven Design Part 2…

By Dung_H
< 1 MIN READ

Virtually Simulate Vehicle Pass-by Noise in an Inherently Controlled Environment

May 23, 2018

Sirens. Before you see the ambulance, you hear them, right? And then it increases as the ambulance comes close, passes by, and then fades away as the ambulance moves away, that’s the instantly recogn…

By Ganesh Sethuraman
< 1 MIN READ

Webinar: Optimize heavy equipment operability and productivity

May 23, 2018

Faster, lighter and more durable
 
Simcenter portfolio helps you address the increasing complexity in heavy equipment operability and efficiency optimization  
For a heavy equipm…

By Eva Moysan
< 1 MIN READ

Composites Curing: A Recipe for Success

May 18, 2018

The manufacture of thermoset composites (referred to as composites curing) has to-date followed a very similar artistic process, and the challenge is to find the right recipe.

By Ganesh Sethuraman
3 MIN READ

Efficient Rotor Dynamics for Multi-Stage Turbomachinery

May 9, 2018

The structural dynamics study of complex turbomachines, like jet engines or gas turbines, is a challenge today. The rotating parts of turbomachines are usually designed with different stages on …

By Ganesh Sethuraman
3 MIN READ

Predict Noise Radiation with Acoustic Transfer Vectors

May 7, 2018

A couple weeks ago, I touched on some of the capabilities in our newest release of Simcenter 3D Acoustics. However, there’s more!
 
Our team has worked effortlessly to develop a solution for…

By Dung_H
< 1 MIN READ