Realize LIVE: Teamcenter Go VR! Contest 2019
Thank you to everyone that entered into the Teamcenter Go VR! Contest at Realize LIVE! 2019. Our two winners are Daniel Geladin, who came in first place with 23 seconds, and Matt Parker, who came in second place with a close score of 24 seconds!
Contest Rules
This program (“Contest”) is open to persons 18 years of age and older. This Contest is not open to employees of Siemens Product Lifecycle Management Software Inc. (hereinafter “Siemens PLM Software”), its subsidiaries, affiliates, resellers, advertising and promotional agencies or members of their immediate families. Void where prohibited.
Go VR! Activation Activity:
To enter this Contest, you must register for and attend Realize Live 2019 and provide your personal details to Siemens at its event registration desk, which is located on the 2nd floor of Cobo Hall, outside of the Solutions Center. This event is to be held in Detroit, MI, from June 11, 2019 (EST) to June 13, 2019 (EST). Scanning an attendees badge does not create an entry for the Contest drawings. Winners are selected from all eligible entries collectively received during all days of the conference.
To qualify for this Contest, you will need to perform an assembly task within our VR software and then put parts back to their original positions within our Teamcenter® platform, Go VR! software. Become an apprentice mechanic and learn to re-assemble a gearbox by following live instructions from a trainer in a virtual environment. The contestant who completes the steps most accurately and efficiently wins! Your final score will be the time it took you to complete the assembly, plus any penalty seconds. Fifteen (15) penalty seconds will be added for each of the following:
- Any components left uninstalled
- Any parts that have not fully snapped to their correct location
- Any steps done in the wrong order
All participants may conduct one (1) practice round.In addition, all participants may perform an assembly task up to two (2) times in an effort to have his or her best time an assembly accuracy recorded for the leaderboard.
Times will be kept on a leaderboard throughout the conference. On Thursday June 13, 2019 at 12:00 noon (EST), the two (2) registered entrants that completed the assembly the fastest and most accurately, will receive a prize.
Each winner will have until 3:00 PM on June 13, 2019 to collect his or her prize in person or it will be mailed to the address provided. You must show valid identification to collect the prize at the Event. The two (2) prizes to be awarded are:
- First place: One (1) HTC Virtual Reality System Vive Pro Starter Kit – PC (estimated retail value of $1099 USD);
- Second place: One (1) HP Windows Mixed Reality Headset VR1000-100 (estimated retail value $449 USD)
The “Prize” or collectively the “Prizes”.
The determination of the winners will be conducted by Siemens PLM Software whose decision is final on all matters relating to this Program.Winners are responsible for all applicable federal, state, and local taxes. Siemens PLM Software will cover shipping costs, including international shipments. All Prizes will be awarded and are non-transferable. No cash or other substitutions are allowed except by Siemens PLM Software’s sole election due to Prize unavailability. Odds of receiving a Prize are dependent upon the total number of entries received. Winners may be required to sign an IRS form W-9 or other tax document required under local law. If applicable, winners are responsible for all costs associated with data plan(s), Wi-Fi access and/or other use-related fees incurred in connection with use of an electronic device.
Entrants may not enter with multiple identities nor may entrants use any other device or artifice to obtain more than the maximum number of entries. Any entrant who attempts to participate multiple times or with multiple identities or uses any device or artifice to obtain more than the maximum number of entries may be disqualified. Altered, mutilated or illegible entries will be disqualified. Siemens PLM Software is not responsible for lost, late, delayed, mutilated, illegible or misdirected entries or for electronic errors.
By submitting an entry for this Program, entrant agrees to abide by these official rules and any decision Siemens PLM Software makes regarding this event. Siemens PLM Software reserves the right to disqualify from this Program, and to prosecute to the fullest extent permitted by law, any entrant or entrant who, in Siemens PLM Software’s reasonable suspicion, tampers with the entry process, intentionally submits more than a single entry or mechanical entries, violates these official rules, or acts in an unsportsmanlike or disruptive manner.
By submitting an entry for this Program, entrant (a) agrees to the decisions of Siemens PLM Software which shall be final in all respects; (b) consents to the use of entrants’ name, likeness and any statements, quotes or testimonials provided by entrant for advertising and publicity purposes without further compensation, except where prohibited by law; (c) and agrees to hold harmless and fully indemnify and release Siemens PLM Software, its subsidiaries, and affiliates, and their directors, officers, employees and agents from any and all liability, damages, or causes of action (however named or described) caused by or arising out of entrant’s participation or acceptance, possession or use of any Award.
If for any reason this Program is not capable of running as planned due to infection by computer virus, bugs, tampering, unauthorized intervention, fraud, technical failures, or any other causes which, in the sole opinion of Siemens PLM Software, corrupt or affect the administration, security, fairness, integrity, or proper conduct of this Event, Siemens PLM Software reserves the right to cancel, terminate, modify or suspend this Event and conduct a random drawing to award the Awards using all eligible non-suspect entries received as of the termination date. If the Event is terminated due to tampering or technical difficulties prior to its expiration date, notice will be posted at https://community.plm.automation.siemens.com/t5/Teamcenter-Blog/bg-p/Teamcenter-Blog
Siemens PLM Software is not responsible for any incorrect or inaccurate capture of information or the failure to capture such information by any of the equipment or programming associated with or utilized in this Event.
For the name of winners, mail a self-addressed stamped envelope with the words “Teamcenter Realize LIVE VR Contest 2019” to:
Siemens PLM Software
Attention: Teamcenter Product Marketing
5555 New King Dr, Troy, MI 48098
The name of winners will also be posted athttps://community.plm.automation.siemens.com/t5/Teamcenter-Blog/bg-p/Teamcenter-Blog
This promotion is not affiliated in any way with HP Inc., HTC Corp., or any subsidiary or affiliate of any of these companies.
This Contest, the rights and obligations of Siemens PLM Software, and the rights and obligations of entrants and winners will be governed and controlled by the laws of Texas, applicable to contracts made and performed therein without reference to the applicable choice of law provisions. All actions, proceedings, and litigation relating hereto will be instituted and prosecuted solely within the State of Texas. The parties consent to the jurisdiction of the state courts of Texas and federal court located within the state and county with respect to any action, dispute, or other matter pertaining to or arising out of this promotion. Contest is void where prohibited.
By entering this Contest, entrant acknowledges and agrees to Siemens PLM Software’s collection and use of entrant’s personal information, such as name, address, telephone number and e-mail address, for any purpose, including but not limited to, contacting entrant from time to time to inform entrant of products, programs, services and promotions that Siemens PLM Software believes may be of interest to entrant. By entering this Contest, entrant hereby acknowledges that he/she has read and accepted these Contest Rules.
Teamcenter is a trademark or registered trademark of Siemens Product Lifecycle Management Software Inc.
Contact Siemens PLM Software
5800 Granite Parkway
Suite 600
Plano, TX 75024
USA
(v): +1 800 498 5351
