Electronic Manufacturing Services

Practical advice on PCB stackup planning

April 28, 2022

The more technology advances, the more attention we must pay to every aspect of printed circuit board (PCB) design, including…

By Patrick Hope and Mark Forbes

< 1 MIN READ

PCB Stackup Design e-book

January 28, 2022

While not the final word on the subject of stackups, Bill’s e-book goes a long way to helping you plan ahead, providing an important voice in a space that is surprisingly lacking in content. I would also recommend exploring Z-planner Enterprise, a stackup tool that Bill has spent years developing. Now all you need is a sharp pencil.

By Patrick Hope

3 MIN READ

Valor Parts Library: What You Need to Know

December 27, 2021

Validating the PCB footprint with a comprehensive component library Are you familiar with the Valor Parts Library? Whether you are…

By Tova Levy

< 1 MIN READ

How do you do PCB Stackup Planning?

December 8, 2021

Being able to quickly qualify materials based on your known electrical tolerances, and not upon the materials availability of your selected fabricator is key for efficient stackup design. This allows you to optimize the design around the available materials and take complete control of your stackup.

By Don Kost

3 MIN READ

Flex & rigid-flex PCB DFM: Learn from the expert

November 24, 2021

Flex and rigid-flex circuits use unique materials in the manufacturing process and must be handled differently than FR4 PCBs.

By Patrick McGoff

< 1 MIN READ

Creating Custom Automation in Valor NPI Using Scripting Languages

November 10, 2021

The most modern language supported and delivered with Valor NPI is Python. If Perl is your language of choice then an additional module needs to be acquired through Active State. When all else fails there is the legacy C-Shell that is also included with Valor NPI.

By Max Clark

3 MIN READ

The last step in PCB design needs more attention

October 18, 2021

We put a lot of attention on the first step of a process and then it seems we fall behind schedule. By the time you get to the last step of a process you are out of time and just need to wrap things up. How often are you pressed by management to get a PCB design out the door and sent to the fab house?

By Patrick McGoff

< 1 MIN READ

On-demand webinar: PCB Stackup Planning

September 14, 2021

See how material choices can make or break your design, and how to compare materials not just for the technical match, but for selecting the best material at the best value. You will also learn how today’s (and tomorrow’s) high speed circuits have brought new considerations into stackup design such as copper surface roughness and glass-weave skew.

By Mark Forbes

< 1 MIN READ